Solvline TestView Manual do Utilizador descarregar pdf (Página 15)

Chapter 4. Port Menu

TestView

4-3

4.1.4 Com Ports Window Main Menu

“COM Ports” menu is presented when you open ports. The following example shows that 8 ports are

opened from COM7 to COM14. Buttons affect all ports shown in this window.

z Menu description

y Connect : Open all or selected ports.

y Disconnect : Close all or selected ports.

y Setup : Change default communication options for individual ports.

y Clear : Initialize all counts for all or selected ports.

y Send Data : Send character data (A~Z) to all or selected ports.

y Start Throughput : Start calculating throughput for all or selected ports.

y Stop Throughput : Stop calculating throughput for all or selected ports.

y Terminal : Run port emulator for all or selected ports

y Add Port: Add Additional Ports

Tip

When you drag your mouse for more than 1 ports and right-click, pull-down menu is

displayed. You can control port operations with this menu.

4.1.5 Com Ports Window Description

Port information is described in a number of parameters.

z Columns

y Port: Com Port number

y Status: connection status. Connect: connected, Close: disconnected.

y Option: Baudrate/parity/data bit/stop bit/Flow control type displayed.

y Signals: RTS/DTR/CTS/DSR/DCD/RI signal displayed.

y Send Bytes: Tx Byte count

y Receive Bytes: Rx Byte count

y Parity: Parity bit error count

y Overrun Error: Overrun Error count

y Transmit throughput/Receive throughput: Tx/Rx data per second

y Running: Time elapsed from the opening of the port. Cleared when ‘Clear’ is selected.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

Sem comentários

Solvline TestView Manual do Utilizador Página 15